Raqcop 1.4.20

[Davesworld]

Hello! Raqcop 1.4.20 is here. In addition to the improvements from the IPCop team themselves and with a little help from a few of the IPCop Devel team members, we Cobalt users now have Flash drive support and all sizes available will be posted shortly. they are all gzipped images and have to be unzipped before you use the dd command in Linux or Winimage in Windows. The same default raqcop passwords apply here as well as the default address.

The usual (for us anyway so far) VMWare image that can be installed via Winimage to the default 20GB drive is uploaded as well as the cd image for those of you who want to install Via VMWare or a donor machine yourselves.

As far as improvements related to Cobalt use, the kernel has been cleaned up as far as only embedding ide drivers that any Cobalt will ever use with the exception of the Highpoint driver which applies only to the Raq XTR. Also, the embedded Cobalt drivers for the Raq550 are in this build as well. Since this is a headless device, I expanded the fsck portion of the sysinit to three stages with auto yes instead of auto repair and it will NOT need user intervention until error level 4. The lcd tells exactly what it is doing and if it needs to reboot after repairing itself in level 2 or level 3. If it reaches level 4, the lcd tells you to hook up a serial console cable. Expect it to reboot itself at least once after a fresh imaging, mainly if using the flash images. Much more verbose LCD info on boot here.

I will upload the build tree as well over tonight.