RAQCOP = IPCop + Cobalt Raq, Cobalt Raq Firewall Applicance Software, Velociraptor Software Upgrade.

raqcop.com > General Category > General Discussion > RaqCOP is dead. Long live RaqCOP

Pages: [1]

« previous next »

Author

Topic: RaqCOP is dead. Long live RaqCOP (Read 438 times)

bradywang

Newbie

Posts: 2

RaqCOP is dead. Long live RaqCOP

« on: January 07, 2011, 07:59:32 PM »

I woke up on Tuesday and found my RaqCOP (raq4r) was rebooting about every 5 minutes I thought it overheating or something. when i took off the lid i found a very nasty surprise most of the caps had blone. I hope my new raq4 arrives very soon i don't like using my DSL modem as my firewall router.


	Logged

Davesworld

Administrator
Sr. Member

Posts: 282

I'm the same Dave who patches and compiles raqcop.

Re: RaqCOP is dead. Long live RaqCOP

« Reply #1 on: January 07, 2011, 09:20:53 PM »

Pretty obvious. Bulging caps is one of the things to look for on a new (used) Raq. How are your soldering skills? Caps are a whole lot easier to replace than the flashrom. Even changing clocking and voltage is much more difficult than the caps (I think as I have only done the clocking and voltage change on a few raqs).

Yes I agree with not using the modem's built in stuff.


	Logged

Main Daily Firewall: Cobalt Raq 4i modded to use a low voltage K6-III 1.8v 256k cache 500mhz clocked at 550mhz, VFD display. Raqcop 1.4.21

Others: One additional 4i for development left stock and two Symantec Velociraptor 500's with the 550mhz low voltage processor mod. Raq550, Two Raq XTR units